Follow us:
Browse Products
10 SIZES AVAILABLE
Bolts, Nuts & Washers, Fasteners, Hex Bolt
5/8″ UNF B80FZ SERIES GRADE 8 HEX ZINC – BOLT ONLY
Grade 8 UNF AS2465 Zinc Plated Hex Bolt
Available in:
| 5/8 X 1 1/2 | 5/8 X 1 1/4 | 5/8 X 1 3/4 |
| 5/8 X 2 | 5/8 X 2 1/2 | 5/8 X 2 1/4 | 5/8 X 2 3/4 |
| 5/8 X 3 | 5/8 X 3 1/2 | 5/8 X 4 |
Grade 8 UNF AS2465 Zinc Plated Hex Bolt
| Finish | Zinc |
Related products
-
Fasteners, Masonry Fixings, Screw Anchors, Concrete Screw Anchors, Countersunk Head Screw Anchors
GRABCON® COUNTER SUNK HEAD – CARBON STEEL – GALVANISED
Grabcon® is part of ICCONS concrete and masonry screw family, coated in a mechanical galvanised finish and available in a flanged hex or Phillips #2 (5mm anchor) and Phillips #3 (6.5mm anchor) countersunk head styles. The Grabcon is incredibly versatile with its high-low cutting thread profile allowing it to tap its own thread into masonry substrates, resulting in a plug less fixing. These fasteners are ideal for light to medium duty applications when fastening into concrete, brick and block. Available in both galvanised hex and countersunk variant, this versatile screw should be in every tradies toolbox!
Available in | (3/16 X 2-1/4″) 5 X 58 | (1/4 X 1-3/4″) 6.5 X 45 | (1/4 X 4″) 6.5 X 100 |
SKU: n/a -
Fasteners, Masonry Fixings, Sleeve Anchors, Flush Head Sleeve Anchors
SLEEVE ANCHOR FLUSH HEAD – 8MM DRILL DIAMETER
The Flush Head Sleeve Anchor is a medium duty pre-assembled torque controlled expansion anchor consisting of a threaded plow bolt and a pressed carbon steel sleeve designed to expand when cone is tightened locking the sleeve against the wall of the hole. Features a flush head leaving the fixture with a more discrete /clean finish than a traditional hex head sleeve anchor. Ideal for various base materials such as concrete, solid brick or concrete block.
Embedment depths available: 45mm, 70mm and 90mm
Available in Zinc.
SKU: n/a -
Fasteners, Masonry Fixings, Chemical Anchoring, Cartridges
HYBRID GEN2 INJECTION ADHESIVE – WITH C2 SEISMIC CERTIFICATION
When it’s CODE PLATINUM it’s Hybrid Gen 2.
Combining the superior strength of Epoxy with a fast cure Vinylester.
Fire Rating F120 (2 hours) and approved for use in temperatures up to 160°C.
ICCONS BIS-HY is a rapid cure, styrene free, non-sag, extreme performance Hybrid Injection Adhesive.
BIS-HY is suitable for Threaded Rod and Rebar in cracked and non-cracked concrete and Australia’s first rapid cure with Seismic C2 approval for threaded rod.
This revolutionary adhesive injection system lends incredible characteristics to almost all adhesive anchor applications in the professional and DIY spaces.Available in | 280ml | 420ml |
SKU: n/a
