Follow us:
Browse Products
4 SIZES AVAILABLE
Fasteners, Hex Head, Screws, Self Drilling
SCREW 12-24 SELF DRILLING HEX 5 SERIES WITH SEALING WASHER FINE C4
Self drilling hex head screw with a 5 series drill point and an EPDM sealing washer (aka series 500) for drilling through up to 12mm mild steel in metal brackets, components, steel sections and assemblies where a rubber seal is required.
Available in:
| 12-24 X 32 |
| 12-24 X 50 |
| 12-24 X 65 |
| 12-24 X 85 |
The flanged hex head lends to high pull-out strength. Available in class 4 galvanised finish making them perfect for internal, external applications. ICCONS 5 series (series 500) self drilling hex head screw has a hardened steel point, and fine thread enabling the screw to drill and tap its own thread, without the need to pre-drill (please see screw self drilling capacities).
Features
• EPDM sealing washer
• for fastening steel up to 12mm thick
• Easy installation
• Fine thread for better adjustment capabilities
• Available in class 4 galvanised finish, perfect for internal and external affected applications
• High pull-out loads
• No pre-drilling (please see material thickness for drilling capacities)
Applications
• Ideal for fastening steel brackets, metal components, steel sections and assemblies where a rubber seal is required
Related products
-
Fasteners, Masonry Fixings, Screw Anchors, Concrete Screw Anchors, Countersunk Head Screw Anchors
GRABCON® COUNTER SUNK HEAD – CARBON STEEL – GALVANISED
Grabcon® is part of ICCONS concrete and masonry screw family, coated in a mechanical galvanised finish and available in a flanged hex or Phillips #2 (5mm anchor) and Phillips #3 (6.5mm anchor) countersunk head styles. The Grabcon is incredibly versatile with its high-low cutting thread profile allowing it to tap its own thread into masonry substrates, resulting in a plug less fixing. These fasteners are ideal for light to medium duty applications when fastening into concrete, brick and block. Available in both galvanised hex and countersunk variant, this versatile screw should be in every tradies toolbox!
Available in | (3/16 X 2-1/4″) 5 X 58 | (1/4 X 1-3/4″) 6.5 X 45 | (1/4 X 4″) 6.5 X 100 |
SKU: n/a -
Fasteners, Masonry Fixings, Light Duty, Wallmates
NYLON WALL MATE PLASTER-BITES – 100 BOX
ICCONS nylon plaster-bites are a single piece, self drilling drywall anchor. Available in both drill-point for quick installation or fish-mouth to accommodate for any length of screw. The sharp thread profile cuts smoothly though the drywall ensuring maximum holding capacity. Accommodates both 6 and 8 gauge screws.
SKU: 20/WALLN -
Fasteners, Masonry Fixings, Chemical Anchoring, Capsules
VDP-QUARTZ CHEMICAL ANCHOR GLASS CAPSULES
When its CODE GOLD its a capsule.
ICCONS VDP-Q Capsules are the highest performing capsules available. Zero wastage, fast installation, superior overhead performance and incredible cure times for almost instant loading.1-2-3-SAFETY
1. Volume Control: Factory pre-measured components guarantee the correct composition and volume of components. After Installation of the rod, the overflow of anchor components provides a visual confirmation of a 100% filled hole.
2. Resin Check: The transparent glass capsule allows the installer to check the quality of the resin. Usability is given when the resin runs easily inside the capsule at lukewarm temperature.
3. Auto Clean: During the installation of the anchor rod the quartz and glass components of the capsule scrape the wall of the pre-drilled hole, removing drill dust. This auto-cleaning function results in an excellent adhesion between the anchor rod and the surrounding concrete.Available in | M10 | M16 | M20 | M24 |
SKU: n/a
